This is a Proprietary Web site, including information and inputs from colleagues as well as the site authors. In preparing this site effort has been made to offer the most current and clearly expressed information possible.

Unless otherwise allowed by law or stated elsewhere, NO part of the normally displayed text or graphics, including keywords and HTML commands not normally displayed, on this site may be reproduced or transmitted in any form or by any means, electronic or mechanical, including by photocopying, facsimile transmission, recording, rekeying, scanning, or scanning, or yet uninvented means, or by using any information storage and retrieval system, EXCEPT WITH THE PRIOR WRITTEN PERMISSION OF THE AUTHOR AND APPROPRIATE REFERENCES TO THIS SITE AS DEFINED BY THE AUTHOR. All text is intellectual property and is copyrighted. Each web page or portion thereof contained in this site has a retail value of $6,000.00 US and is only available when ordered from the author. No portion of this site may be used or redistributed for commercial purposes. Utilization of resources from this site and associated server (such as "cgi" programs, SMTP resources (email) and others) shall carry a fee of $3,000.00 per use and all such uses require the prior written permission of the author. Theft will result in consequences.

Where repeated traffic to the site is intended to disrupt performance or to consume resources (thus increasing our server fees), or where such traffic is intended to increase advertising fees associated with an outside service (such as pay-per-click or impression-based billing service), each visitation will be billed at A$2,500.00 per incident.


Toll Free 1-800-AAA-ACME • Tel 480 966-9311 • Fax 480 966-2273
2003 E. Fifth St., Bldg. #1, Tempe, AZ 85281
Email
:
info@acmerubber.com

silicone rubber | fluorosilicone rubber | viton® fluoroelastomer | nitrile NBR rubber | neoprene rubber
hypalon rubber | natural rubber | EPDM rubber | SBR rubber | polyurethane rubber

molded rubber | lathe cutting rubber | die cut rubber | rubber fabrications | polyurethane casting
rubber splicing | machined rubber | rubber step bushings | rubber washers

rubber extrusions | extruded rubber | extruded U channels rubber | extruded L strips rubber
extruded U channels with bulbs | D bumpers extruded dock bumpers | extruded P strips rubber
extruded H channels rubber | extruded e channels rubber | extruded half rounds rubber
extruded wing bumpers rubber | T Shapes

neoprene rubber tubing | silicone rubber tubing | viton rubber tubing | polyurethane rubber tubing
neoprene rubber cord | silicone rubber cord | viton rubber cord | polyurethane rubber cord
EPDM rubber cord | sponge cord | buna n nitrile cord | neoprene EPDM square & rectangular strips
silicone square & rectangular strips | viton square & rectangular strips
sponge square & rectangular strips | rubber sheet

neoprene rubber sheet | neoprene EPDM cloth inserted sheet | silicone rubber sheet | silicone sponge sheet
silicone cloth inserted sheet | viton sheet | butyl rubber sheet | hypalon rubber sheet | buna n sheet black
buna n sheet FDA white | EPDM sheet | polyurethane sheet | latex sheet | natural gum rubber sheet
rubber matting | kalrez ® | nitrile vinyl PVC sponge sheet | aflas sheet
viton® sponge sheet | silicone vacuum blankets | fluorosilicone sheet | masticated rubber sheet

employment opportunities

© Copyright 2013 - AAA Acme Rubber Co., a division of Fillipone Enterprises

Information provided is given in good faith but without warranty, express or implied. Performance of these elastomers is dependent on conditions of use and it is the responsibility of the user to determine suitability for a particular application. Hypalon, Kalrez, Neoprene & Viton are trademarks or registered trademarks of E.I. du Pont de Nemours